Billet Hubcentric Wheel Spacer PCD 5 x 112 - 15 mm

The G54 15 mm Hub Centric Wheel Spacer for 5 x 112 PCD vehicles is engineered to improve wheel position while retaining the low weight and precise fit required for a properly considered chassis setup.

Each spacer positions the wheel 15 mm further out from the vehicle hub. This produces a noticeable but controlled change to stance, filling the wheel arches more effectively and helping achieve a broader, more performance focused appearance.

This model uses a 5 x 112 PCD. The term PCD stands for Pitch Circle Diameter and describes the layout of the wheel fixings. In this configuration there are five wheel bolt positions, with their centres located on a 112 mm diameter circle.

The spacer begins as high quality 6082 aluminium before being precision CNC machined to its final profile. Rather than leaving excess material in place, G54 machines a series of relief pockets to lower component weight.

This approach is especially relevant for wheel spacers because any added weight is located within the unsprung and rotating assembly. Keeping the spacer as light as practical helps maintain suspension control and limits unnecessary rotational inertia.

Accurate wheel positioning is provided by the hub centric design, which centres the spacer securely against the vehicle hub. The bolt apertures use tapered lead ins to assist with wheel bolt alignment and make refitting wheels easier.

Additional side pockets are machined into the spacer specifically to assist removal. This small detail becomes valuable after the spacer has spent time exposed to road grime, water and temperature cycles.

The complete component is anodised, increasing corrosion resistance and providing a durable finish.

For customers searching for 15 mm 5 x 112 wheel spacers, the G54 design offers more than a simple change in offset. It combines visual improvement, additional clearance, increased track width and weight conscious engineering in a single precision machined component.

Key Features

• 15 mm hub centric wheel spacer
• 5 x 112 PCD
• Spaces wheel 15 mm away from hub
• CNC machined from 6082 aluminium
• Lightweight pocketed construction
• Reduced unnecessary rotating mass
• Increased effective track width
• Tapered wheel bolt entries
• Integrated removal pockets
• Anodised for corrosion resistance
• Designed for modified and performance vehicles

G54 products are designed, engineered and manufactured to be used. The warranty is kept simple: if a G54 product develops a genuine manufacturing or material fault, G54 will put it right.

Lifetime Warranty

Unless stated otherwise, G54 products are covered by a lifetime warranty to the original purchaser against defects in materials or manufacture.

The lifetime warranty applies for as long as the original purchaser owns the product and is not transferable.

To make a warranty claim, the original purchaser must provide:

• Proof of purchase or original sales receipt
• Valid identification confirming they are the original purchaser

Moving Components

Components such as bearings are covered for 2 years from the original date of purchase for the original purchaser.

Consumable Components

Consumable items are covered against manufacturing defects for 12 months from the original date of purchase.

Consumable components and moving parts are not covered for normal wear and tear.

Installation

G54 products must be installed correctly by a competent person using appropriate tools and suitable installation procedures.

Where applicable, vehicle manufacturer procedures and torque specifications should be followed unless stated.

Damage resulting from incorrect installation is not covered by the G54 warranty.

What Isn't Covered?

The G54 warranty does not cover:

• Normal wear and tear
• Incorrect or improper installation
• Misuse, abuse or accidental damage
• Damage caused by another faulty vehicle component
• Use on a vehicle or application for which the product was not designed
• Unauthorised modification or alteration of the G54 product
• Cosmetic damage occurring through normal use
• Corrosion or damage caused by inappropriate chemicals, cleaning products or environmental contamination

Normal use of a G54 performance component for its intended purpose does not invalidate the warranty.

Making a Claim

Warranty claims should initially be made through the retailer from which the G54 product was purchased.

Proof of purchase, identification and photographs or other information reasonably required to assess the fault may be requested.

G54 may require the product to be returned for inspection before a warranty claim can be approved.

Where a product is confirmed to have failed as a result of a manufacturing or material defect, G54 will, at its discretion, repair or replace the affected product.

Unless otherwise agreed, this voluntary warranty covers the G54 product itself and does not include installation labour, vehicle recovery, vehicle hire or other associated costs, except where such costs must be covered by law.

Statutory Rights

The G54 No Nonsense Warranty is provided in addition to the purchaser's statutory rights and does not affect those rights.