Billet Hubcentric Wheel Spacer PCD 4 x 100 - 20 mm

The G54 20 mm Billet Wheel Spacer with 4 x 100 PCD is designed for applications requiring a more significant change in wheel position, whether for appearance, clearance or chassis setup.

At 20 mm thick, the spacer moves the wheel 20 mm outward from the hub. This creates a substantial increase in effective track width and allows the wheel to sit much further towards the outer edge of the arch.

For lowered cars and vehicles with conservative factory wheel offsets, this can dramatically improve stance. It can also provide useful additional clearance between the inner wheel and suspension, brake or chassis components.

The spacer is manufactured for a 4 x 100 PCD. PCD stands for Pitch Circle Diameter, the measurement used to describe the wheel bolt pattern. A 4 x 100 configuration uses four wheel fixings located around a circle measuring 100 mm across.

Despite the increased spacer thickness, G54 has worked to minimise weight. The part is CNC machined from 6082 aluminium, with strategic pockets cutting away material wherever it is unnecessary.

Removing this excess mass is important because the spacer rotates with the wheel and sits on the unsprung side of the suspension. A lighter spacer helps reduce the performance penalty associated with adding weight at this location.

A hub centric mounting profile maintains accurate wheel location and ensures the spacer sits positively on the hub. Tapered openings guide the bolts into place during wheel installation, while side pockets are incorporated to provide access for removal.

Anodising protects the spacer against corrosion caused by moisture, brake dust and road salt.

The 20 mm G54 spacer is a strong choice for those looking for wide track wheel spacers, improved wheel arch fill or additional component clearance while still prioritising weight and engineering detail.

Key Features

• Moves wheel 20 mm further out from hub
• 20 mm billet wheel spacer
• 4 x 100 PCD
• Hub centric wheel location
• 6082 aluminium billet construction
• Extensive CNC weight reduction
• Helps minimise added unsprung mass
• Provides a noticeable increase in track width
• Can improve stance and lateral stability
• Tapered bolt locating holes
• Side pockets make removal easier
• Durable anodised finish

G54 products are designed, engineered and manufactured to be used. The warranty is kept simple: if a G54 product develops a genuine manufacturing or material fault, G54 will put it right.

Lifetime Warranty

Unless stated otherwise, G54 products are covered by a lifetime warranty to the original purchaser against defects in materials or manufacture.

The lifetime warranty applies for as long as the original purchaser owns the product and is not transferable.

To make a warranty claim, the original purchaser must provide:

• Proof of purchase or original sales receipt
• Valid identification confirming they are the original purchaser

Moving Components

Components such as bearings are covered for 2 years from the original date of purchase for the original purchaser.

Consumable Components

Consumable items are covered against manufacturing defects for 12 months from the original date of purchase.

Consumable components and moving parts are not covered for normal wear and tear.

Installation

G54 products must be installed correctly by a competent person using appropriate tools and suitable installation procedures.

Where applicable, vehicle manufacturer procedures and torque specifications should be followed unless stated.

Damage resulting from incorrect installation is not covered by the G54 warranty.

What Isn't Covered?

The G54 warranty does not cover:

• Normal wear and tear
• Incorrect or improper installation
• Misuse, abuse or accidental damage
• Damage caused by another faulty vehicle component
• Use on a vehicle or application for which the product was not designed
• Unauthorised modification or alteration of the G54 product
• Cosmetic damage occurring through normal use
• Corrosion or damage caused by inappropriate chemicals, cleaning products or environmental contamination

Normal use of a G54 performance component for its intended purpose does not invalidate the warranty.

Making a Claim

Warranty claims should initially be made through the retailer from which the G54 product was purchased.

Proof of purchase, identification and photographs or other information reasonably required to assess the fault may be requested.

G54 may require the product to be returned for inspection before a warranty claim can be approved.

Where a product is confirmed to have failed as a result of a manufacturing or material defect, G54 will, at its discretion, repair or replace the affected product.

Unless otherwise agreed, this voluntary warranty covers the G54 product itself and does not include installation labour, vehicle recovery, vehicle hire or other associated costs, except where such costs must be covered by law.

Statutory Rights

The G54 No Nonsense Warranty is provided in addition to the purchaser's statutory rights and does not affect those rights.