Billet Hubcentric Wheel Spacer PCD 4 x 100 - 12 mm

The G54 12 mm Billet Wheel Spacers for 4 x 100 PCD applications are designed for drivers looking to improve wheel position, stance and chassis feel without adding unnecessary weight at the hub.

Each spacer moves the wheel 12 mm further out from the hub, providing a subtle increase in track width and helping wheels sit more naturally within the arches. This can be particularly useful on lowered vehicles, modified road cars or applications where the standard wheel position looks too recessed.

The spacer uses a 4 x 100 PCD. PCD means Pitch Circle Diameter and defines the wheel bolt pattern. In this case, the spacer uses four wheel bolt positions arranged around a 100 mm diameter circle.

Precision CNC machined from 6082 aluminium, the spacer combines high strength with low mass. Carefully positioned machined pockets remove material where it is not required, helping reduce unsprung and rotating weight. Keeping weight down at the wheel is especially important on a performance vehicle, where unnecessary mass can work against suspension response, acceleration and steering control.

A hub centric design accurately locates the spacer on the vehicle hub, helping ensure the wheel remains correctly centred and securely supported. Tapered entrances around the wheel bolt holes make locating the bolts easier during installation, while machined side pockets provide a useful access point when the spacer needs to be removed.

The anodised finish increases corrosion resistance and gives the spacer the clean, engineered appearance expected from a G54 component.

A 12 mm spacer is ideal where a modest correction to wheel fitment is required. It can help improve the visual relationship between the wheel and bodywork while also increasing track width, which may contribute towards a more planted and stable feel through corners.

Every detail reflects decades of experience working with modified and performance vehicles. Wheel spacers may be simple components, but G54 approaches them with the same attention to weight, fitment, durability and usability as any other chassis part.

Key Features

• Spaces the wheel 12 mm further out from the hub
• 4 x 100 PCD wheel bolt pattern
• Precision CNC machined from 6082 aluminium
• Hub centric design for accurate wheel location
• Weight relief pockets reduce unnecessary rotating and unsprung mass
• Tapered bolt holes assist wheel bolt location
• Side machining provides easier spacer removal
• Anodised for improved corrosion resistance
• Helps improve stance and wheel position
• Increased track width can contribute towards improved stability and control

G54 products are designed, engineered and manufactured to be used. The warranty is kept simple: if a G54 product develops a genuine manufacturing or material fault, G54 will put it right.

Lifetime Warranty

Unless stated otherwise, G54 products are covered by a lifetime warranty to the original purchaser against defects in materials or manufacture.

The lifetime warranty applies for as long as the original purchaser owns the product and is not transferable.

To make a warranty claim, the original purchaser must provide:

• Proof of purchase or original sales receipt
• Valid identification confirming they are the original purchaser

Moving Components

Components such as bearings are covered for 2 years from the original date of purchase for the original purchaser.

Consumable Components

Consumable items are covered against manufacturing defects for 12 months from the original date of purchase.

Consumable components and moving parts are not covered for normal wear and tear.

Installation

G54 products must be installed correctly by a competent person using appropriate tools and suitable installation procedures.

Where applicable, vehicle manufacturer procedures and torque specifications should be followed unless stated.

Damage resulting from incorrect installation is not covered by the G54 warranty.

What Isn't Covered?

The G54 warranty does not cover:

• Normal wear and tear
• Incorrect or improper installation
• Misuse, abuse or accidental damage
• Damage caused by another faulty vehicle component
• Use on a vehicle or application for which the product was not designed
• Unauthorised modification or alteration of the G54 product
• Cosmetic damage occurring through normal use
• Corrosion or damage caused by inappropriate chemicals, cleaning products or environmental contamination

Normal use of a G54 performance component for its intended purpose does not invalidate the warranty.

Making a Claim

Warranty claims should initially be made through the retailer from which the G54 product was purchased.

Proof of purchase, identification and photographs or other information reasonably required to assess the fault may be requested.

G54 may require the product to be returned for inspection before a warranty claim can be approved.

Where a product is confirmed to have failed as a result of a manufacturing or material defect, G54 will, at its discretion, repair or replace the affected product.

Unless otherwise agreed, this voluntary warranty covers the G54 product itself and does not include installation labour, vehicle recovery, vehicle hire or other associated costs, except where such costs must be covered by law.

Statutory Rights

The G54 No Nonsense Warranty is provided in addition to the purchaser's statutory rights and does not affect those rights.